Hafman polyester putty

Hafman polyester putty


For metal, aluminum, cast iron and galvanized surfaces


Hafman polyester putty basis on European unsaturated polyester resin has been manufactured with best raw materials of the day .polyester putty is a semi flexible, with excellent adhesion, shaping and sanding properties & has wonderful Soft scatter. Another advantage of this product is the high resistance of the putty and its flexibility.


Terms of use:

At the first the intended surface should be free of any pollution and dust, rusty, oil then sanding 80-90 in the intending place. Mix content of the can well. For each 100 grams putty, put 2 grams of hardener on a special spatula, then apply to the desired surface. After 20 min, sand the used place with 80 grit sandpaper.


Storage : Keep in indoors &  away from the sunlight . It can be kept for one year at 25 ° C.


CAUTION: keep out of reach of children. In case of contact with eyes & skin rinse immediately for 10 minutes. The vapor of this product is volatile. Keep away from direct heat and fire. The environment is well ventilated when used. When working with putty and sand making, use of a mask is mandatory.

Hafman polyester putty is produced and supplied in the following color:  grey & cream

Hafman Glass fiber putty

Hafman Glass fiber putty


Glass fiber putty is a semi flexible, auto body putty used as a putty in the body of the car and fiberglass surfaces with excellent adhesion, shaping and sanding properties. It has a butter-like work ability with a creamy texture for easy application. With the addition of benzoyl peroxide (the hardening substance) it readily hardens even at lower temperatures (below to 5°C). Polyester Putty provides a tack-free and pin-hole free surfaces with no shrinkage after curing.



Polyester Putty can be applied to bare metal, including aluminum, galvanized steel, SMC, FRP as well as old painted metal surfaces. It can also be applied on glass fiber surfaces.


MIXING RATIO: At the room temperature, mix the ingredients with 2-3% benzoyl peroxide and then use.

GEL TIME: 4-6 minutes depending on temperature and proportion of benzoyl peroxide paste.

SANDING: Polyester Putty can easily be sanded after 20 to 30 minutes after application.


STORAGE : Polyester Putty should be kept in its original can and in a cool place with the lid securely closed. Polyester Putty can be stored under suitable conditions, for one year at temperatures up to 25°C.


CAUTION: Flammable. Vapor may cause flash fire. Store at a temperature of 25-20 ° C. Do not return unused mixed putty to can. Polyester Putty should only be used by trained professionals. Harmful if inhaled. Irritating to eyes and skin. Do not eat, drink or smoke while using this product. Do not breathe the vapors. In case of contact with eyes, rinse immediately with plenty of water and seek medical assistance. If swallowed, do not induce vomiting. Call a physician immediately. Use only in well-ventilated areas away from heat and flames. Keep out of reach of children. Keep lid tightly closed when not in use. You can never use a can of food.

Hafman Glass fiber putty is produced in green and grey colors.

Address: Atlas Fam Sahand Industrial paint co. 1 st 20meters st . 3rd meters st , Shahid Salimi Industrial Zone , Tabriz , Iran

Tel : +98 413 4329010 -11

Fax: +98 413 4321438

Commercial Manager: +98 914 4124356

Hafman polyester putty
Hafman Glass fiber putty
Hafman polyester putty
Hafman Glass fiber putty